Visitor Training

​The Visitor Training Matrix will help invited visitors identify the training requirements for general plant visits, meetings, etc. The Contractor Training Matrix identifies the training required for persons performing work or services at Pantex.

For your convenience, some courses are available to read before your visit. Additional training may be needed depending on job and/or facility requirements.
 
Bring completed training completion forms (PX-3864s) with you when you arrive to the Plant. Faxed forms are often illegible and are NOT acceptable. If a social security number is entered on the form, the form should be handled as Official Use Only (OUO), and if emailed to the Plant, the email should be encrypted.
 
Visitors with NNSA-recognized clearances
Pantex Orientation (Course #603.24) is required for all cleared Plant visitors and must be renewed every five years. Once you have read Course #603.24, print and complete the PX-3864 Training Completion form.
 
Subcontractors and Uncleared Visitors
Subcontractor/Uncleared Visitor Training (Course #553.05) is required for all uncleared visitors and Pantex Plant contractors, and must be renewed annually. Once you have read the course, print and complete the PX-3864 Training Completion form. 
 
The Annual Security Refresher Course #66.09 is also required for all cleared subcontractors. Once you complete Course #66.09 online, print and complete the PX-3864 Training Completion form.  
 

   

Pantex Essential Training (PET) Test-Out Study Guides
Please be aware of our testing policy:

  • You may NOT use your notes/study guides while taking the test
  • Passing score for each test is 80%; score(s) below 80% will require attending the classroom training upon arrival

Once you have studied the materials and are prepared to take the test, contact your Pantex POC. You may also contact the Visitor/Contractor Training Officer at (806) 477-3603 or (806) 477-4878.
Study Guides:

Emergency Management (Course #141.01)
Explosive Safety Initial (Course #5.01)
Fire Protection (Course #60.18)
Hazard Communication (Course #31.01)
Occupational Safety & Health (Course #145.01)


 

 CONTACT:

 

Visitor/Contractor Training Officers
(806) 477-3603 or (806) 477-4878